MEG-SI TYPE SILICONE INJECTION MACHINE

The MEG-SI type Silicone Injection Machine is a two-component, low-pressure system that features a highly accurate metering pump and a static mixing head. It provides superior quality of mixing and injection for its users. The system includes a metering unit, a raw material tank unit, a main control panel, and a mixing head. Thanks to its compact design, all components are neatly positioned on an integral frame.

Product features

MEG-SI Type Specifications

  • Error-free metering and excellent blending
  • Its static mixer lowers the heat generation during the foaming and mixing processes.
  • The raw material tank's large-diameter sight glass window allows for raw material monitoring at any time of the process.
  • Easy operation and easily manageable maintenance

Mixing head Special Features

  • Compact design results in easy maintenance
  • Non-driven static mixers ensures minimal or no air in raw materials, making them ideal for silicone mixing and molding.
  • High-precision dispensing achieved through accurate bubble-dispense operation.
Scrollable
TypeⅠTypeⅡTypeⅢ
COMPOUNDING RATIO80:100　～　100：80
MIXING HEADCIRCULATION DISCHARGE,STATIC MIXER TYPE BLENDING SYSTEM
DISCHARGEA Comp.2.5-5.0cc/sec5.0-10.0cc/sec7.5-15.0cc/sec
B Comp.2.5-5.0cc/sec5.0-10.0cc/sec7.5-15.0cc/sec
VISCOSITY100　～　3000mPa· s
MATERIAL TANK 2unitsCAPACITY　　20L
MAX.VACUUM PRESSURE　-0.1MPa
MAX. APPLIED PRESSURE 0.2MPa
LARGE-DIAMETER SIGHT GLASS WINDOW
DRY RUNNING PREVENTION SENSOR ATTACHED
PIPING MATERIALSUS304
RAW MATERIAL THERMOMETERREMOTE THERMOMETER
INJECTION PROGRAM10 （INJECTION TIME,A·B DISCHARGE RECORD）
POWER SUPPLY3phase 200V
0.2KW		3phase 200V　0.4KW3phase 200V
0.4KW
AIR COMPRESSOR
（for the pressure tank)		above 0.5MPa
EXTERNAL DIMENTIONSW=1520 x D=850 x H=1742　mm
APPROXIMATE WEIGHT300kg

Back to List