- TOP
- Products and System
- Foaming - Injection Machine
- Foaming Machine , Injection Machine
- MEG-NE POLYURETHANE LOW-PRESSURE FOAMING MACHINE
MEG-NE POLYURETHANE LOW-PRESSURE FOAMING MACHINE
MEG-NE is a high-performance two-component polyurethane low-pressure foaming machine. This compact machine has been optimized over the years through continuous technological improvements and innovations of its prototype MEG-E, introduced and launched in 1970. The MEG-NE is available in two types based on the raw material mixing method: a pneumatic (air-driven) mixing system and an electric motor-driven mixing rotor.
The configurations of the MEG-NE equipment include:
-MARK-LB type, two-component electric motor-driven mixing head
or
-MARK-AM type, two-component non-driving air mixing head.
Both options provide effective raw material mixing and a highly accurate metering unit.
- 2 units of SUS-made raw material tanks of 30l capacity each
- A SUS- made solvent tank of 1l capacity
- A control panel, equipped with a display and a built-in temperature control device, visualizes maintenance alerts and helps maintain a fixed temperature for the raw materials.
The MEG-NE is widely versatile and suitable for producing rigid, semi-rigid, and flexible foams, as well as microcellular urethane and more. Additional raw material tanks with capacities of 50 liters, 100 liters, or 200 liters can also be installed.
The machine offers two mixing system options:
Motor-Driver Mixing Rotor System
Pneumatic Mixing System
MARK-LB TYPE, MOTOR-DRIVEN SYSTEM ADVANTAGES
- Mixing rotor and chamber with no air entrainment and little dripping of residual liquid.
- A highly efficient mixing rotor shape – high precision mixing of the different velocity level raw materials ( low to high)
- An air-driven ejection device for an accurate ejection.
- A backflow prevention device that can completely seal the materials
- Solvent flush mechanism with a good cleaning effect
- Easy maintenance and disassemble processes
- Cost-effective operation
MARK-AM TYPE, PNEUMATIC SYSTEM ADVANTAGES
- Optimum function for injection molding insulation and building material panels.
- Compact operation and easy maintenance due to the lightweight simple design.
- Mixing air adjustment function makes it compatible with a wide range of raw material characteristics.
- Good raw material mixing due to the high performance special fixed type air mixer design
- Spare parts low cost operation
MEG-NE TYPE FLOW SHEET & DIMENSION DRAWING
MEG-NE TYPE MODELS AND DISCHARGE CAPACITY DATA
| Type | Polyol：Isocyanate （100：100） | |
| Min. Discharge ℓ / Min | Max. Discharge ℓ/ Min | |
| MEG-NE-6 | 1.5ℓ/Min | 6.0ℓ/Min |
| MEG-NE-12 | 3.0ℓ/Min | 12.0ℓ/Min |
| MEG-NE-24 | 6.0ℓ/Min | 24.0ℓ/Min |
| MEG-NE-48 | 12.0ℓ/Min | 48.0ℓ/Min |